Galvanized steel or tinned copper (1'5 m and 3 m) crow’s foot grounding kit.

Ground electrode recommended for high resistivity soils. Appropriate for when under a layer of soil there are thin rock layers.

Characteristics
  • Made of galvanized steel or tinned copper.
  • 1.5 and 3 m electrodes.
  • Easy to transport thanks to folding mechanism.
  • Easy connection to the external lightning protection system.
  • Easy installation
  • IEC 62305
  • N-FC 17.102:2011
  • UNE 21186:2011
  • IEC 62561/2

     

  1. Make a trench in the ground 50 cm deep and sufficiently large to install electrodes horizontally. 
  2. The three electrodes must unfold and separate from each other at a 45° angle.
  3. Fill the trench with QUIBACSOL adding alternate layers of mineral compound and landfill (used when the removed topsoil land does not offer an adequate level of conductivity).
  4. Compact the ground ensuring that the landfill and QUIBACSOL have good contact with the electrodes.
  5. Install a registration system (with test joint) that allows for future revisions.

     

Scheme
Technical specifications
Description Reference Material L1 (mm) L2 (mm) A(mm) E(mm) Weight (kg)
l:1500 mm galvanized steel crow’s foot kit 252034 ac.galv. 500 1500 30 3 4,5
l:3000 mm galvanized steel crow’s foot kit 252035 ac.galv. 500 3000 30 3 8,3
l:1500 mm coppered tin crow’s foot kit 252051 Cu Sn 500 1500 30 2 4,3
l:3000 mm coppered tin crow’s foot kit 252052 Cu Sn 500 3000 30 2 8,1

Related products

Grounding cases and covers

Grounding cases and covers

Equipotencial connection / check - switching bridges

Equipotencial connection / check - switching bridges

REQUEST INFORMATION NOW